FAQs

Depending on the option you choose at checkout, here are the shipping times: Standard delivery (one day for processing and 3-5 business days shipping), Expedited (two-day delivery), or Priority (next-day delivery). 
If you have not received your order, please contact us at cs@rattlerstrap.com.
Tracking information will be emailed to the address provided at checkout.
If you have just placed an order and would like to make a change or cancel, please email us at cs@rattlerstrap.com with the order number and details. If we have already shipped your product, we will arrange for you to make a return once the package is received.
If you need to make a return or an exchange, please email us at cs@rattlerstrap.com or fill our the contact form on our website. We accept any returns or exchanges within 30 days for a full refund.

Belts

If you need help determining what size you should order, on each belt page there is a sizing box that will tell you what to order based on your pant size. Please use US sizing (in inches).
Fashion follows function, but with RattlerStrap belts, you don’t have to compromise on either. They are designed first and foremost to be a solid belt that you can wear every day, no matter where you are or what you do. Secondly, we want these belts to be a real asset in a time of need. So, if the occasion arises where you need to get yourself out of a sticky situation, don’t hesitate, start stripping cord!! Tie a single strand around your waist (to keep your pants up) and use the remainder to do whatever it is you need to do to solve your problem! When you do, email us, and we’ll have you send us the buckle and a cool story if you have one. We’ll then make you a new belt at no extra charge. This is the RattlerStrap Guarantee. To take advantage of our guarantee, email us at cs@rattlerstrap.com or fill out our contact form here. Due to limited availability of cord, if you happen to own one of our limited edition belts and need it replaced, we will return your belt remade into our Stealth belt. Guarantee applies to RattlerStrap belts only.
All measurements are approximate. Some cord is slightly thicker than others and weaves can vary in tightness. Belt Width = 1.5 inch. Belt Thickness = 0.25 inch. Rattle Width = 1.25 inch. Rattle Thickness = 0.5 inch. Rattle Length = 2.25 inch. Buckle = 2.44×1.5 inch.
Yes, the belt may stiffen a bit temporarily and could shrink up to 1/2 an inch if fully submerged, but it doesn’t harm the integrity of the belt in any way. This thing is meant to be abused.
Not really. From its design it may look that way and paracord is slightly dynamic in nature, but the belts are woven tightly so there isn’t really any give in the tension. Maybe a bit if you supported your full weight with it.
Yes, it does, but if your holster slits are really tight and narrow you may have a little trouble threading it through. If you can't fit the rattle tail through you might try the buckle end. It’s curved a little but rigid and relatively flat.

Flint Laces

If you need help determining what size you should order, please go to our RattlerStrap Sizing Guide.
The diameter of the Flint Lace tips is 4mm, so please measure the holes in the boot you are planning on wearing them in before ordering to ensure they will fit.  But if you have already ordered and you find they don't fit, please contact us at cs@rattlerstrap.com and we can arrange a return or help with a workaround solution.
In an emergency, a knife will be your best option.Carrying one in the backcountry is highly recommended. Flint or chert rock would be a more difficult but possible solution. Our Flint Laces 2.0 come with a serrated striker plate to be used for this purpose.
Each ferro rod is capable of 100+ strikes each.
If you have the Flint Laces 1.0, cut away rubber cap with a sharp edge, press rod edge into paracord sheath and work it through. Rod should poke through sheath without damage. Note: Laces are designed for emergency use. If you have the Flint Laces 2.0, simply remove the rubber cap and the ferro rod will be exposed. Place rubber cap back on when finished using the ferro.
Ferro rod can be reinserted into lace after use if desired. Work the rod back into lace in opposite fashion of removal, or cut the cord, insert rod into sheath and melt the tip to secure it inside.